[BBLISA] Moving from RAID 0 to LVM RAID?

Scott R. Ehrlich scott at MIT.EDU
Thu Mar 6 18:58:10 EST 2008


So I've learned a valuable RAID 0 lesson, and it fortunately was not a major 
catastrophy.  I got lucky, and had a workable-enough backup on tape to make the 
user who needed some data happy.

Now, from the OS side, LVM is an option.   Say the RAID controller only allows 
hardware striping or mirroring for logical volumes, but I want to use more than 
two disks, and I don't want the RAID 0 problem again.

When I get a replacement disk and build the system from the ground up again, I 
could, conceivably, use hardware RAID 1 for the OS on two disks, and CentOS 5 
64-bit's LVM for software RAID 5 (or maybe 1+0 if available) on the remaining 
for 4 disks, maybe 3 disks as active and the 4th as a hot spare?

I've never had much faith in software raid, since it is not hardware-based, and 
there would be a performance hit, but in this case, it could be an option.

Insights from the OS-created RAID experience welcome.

Thanks again.

Scott




More information about the bblisa mailing list